PRT32 v1.0 fv74.7 Rev. A EN
7/3/2009
_________________________________________________________________________________________
Page 24 of 29
10.
Appendix
Connection Terminals
Connection
terminal
Offline mode
Online mode
(unit connected to host ACU)
Simple Stand-alone
mode
Full Stand-alone
mode
+12V Supply
input
plus.
GND
Supply input minus.
CLK
Can be configured as
an input or output.
CLOCK
communication line.
DATA 0 line for Wiegand formats
CLOCK for Magstripe and RACS
formats.
DTA
Can be configured as
an input or output.
DATA
communication line.
DATA 1 line for Wiegand formats
DATA for Magstripe and RACS
formats.
IN1
Input line, can be configured to several
available functions).
In Wiegand and Magstripe formats,
the IN1 line activated by shorting it
with the supply minus. When IN1 is
triggered it turns the LED OPEN to
on and also activate acoustic signal
on the internal buzzer.
TAMP
Isolated, tamper switch contacts, when case is closed contacts are shorted.
Technical Specification
Input voltage
10...15 VDC
Current consumption
Avg. 60 mA
Anti-sabotage protection
(Tamper)
NC contact, 50mA/24V
Reading distance
Up to 12 cm for ISO cards (depends on cards).
Proximity cards
EM UNIQUE 125 kHz, ASK modulation, 64 bits (compatible with
EM4100/4102).
Communication distance
Between ACU and PRT reader in ONLINE mode: max. 150 m.
Between main PRT reader and second PRT reader: max. 150 m.
Between main PRT reader and XM-2 extension module: max. 150 m.
Environmental class
(according to EN 50131-1)
Class I, Indoor, temperature: +5°C- +40°C, relative humidity: 10 to 95%
(non-condensing).
Ingress protection
IP 30
Dimensions
H105 X W105 X D31 mm
Weight
~140 g
Approvals
CE
