PRT32 v1.0 fv74.7 Rev. A EN
7/3/2009
_________________________________________________________________________________________
Page 9 of 29
first read card and then enter PIN). The Card and PIN option can be set separately
for primary and secondary reader.
The PR32 reader supports five types (classes) of users:
•
INSTALLER
•
MASTER
•
NORMAL
•
TOGGLE
•
TOGGLE LTD
User types (user classes)
INSTALLER
This user is authorized for entry to the Installer Programming mode only. Enter
INSTALLER PIN or read INSTALLER Card and the reader will enter Installer
Programming mode.
MASTER
This user is authorized for entry to the User Programming mode only. Enter
MASTER PIN or read MASTER Card and the reader will enter User Programming
mode.
NORMAL
NORMAL users are solely authorized to unlock the controlled door, they may have
card and/or PIN.
TOGGLE
TOGGLE users are authorized to unlock the controlled door and to control the
Armed/Disarmed mode of the reader, they may have card and/or PIN.
TOGGLE LTD
TOGGL LTD (TOGGLE LIMITED) are solely authorized to control the
Armed/Disarmed mode of the reader, they may have card and/or PIN.
6.2.
Managing the users
A new user can be registered in the device following either a simple or full
programming procedure.
•
The simple programming procedure consists of programming of a PIN code or
card into the unit without specifying the ID number of a user to whom the
programmed PIN/card will be assigned — so the system simply stores the code
entered/card presented in first unoccupied ID number.
•
The full programming procedure requires to specify the ID number for the new
user being programmed which has to be followed by entering his PIN code
and/or presenting his card.
Note: When you program a user using full programming procedure, you will be able
later to selectively delete him by entering his ID number. If you program card/PIN
using a simple programming procedure then to remove a given card/PIN from a
reader you must present card to a reader or enter PIN code to be deleted,
otherwise the only one method to remove it from the memory will be full Memory
Reset.
6.3.
User identification
In PRT32 user can be identified by card, PIN or both (card and PIN). The method
