PRT32 v1.0 fv74.7 Rev. A EN
7/3/2009
_________________________________________________________________________________________
Page 11 of 29
action needed by a TOGGLE user to rearm the reader is to read twice the TOGGLE
card or to enter twice the TOGGLE PIN code — however, when the reader operates
with the Card and PIN mode, user needs to do both things, read a card and enter a
PIN code. TOGGLE LTD users may arm/disarm a reader simply by a single use of
their identification tag (card, PIN or both when Card+PIN option is active).
Note: If the reader operates with an input line configured to option
Arming
Disabled
,
then the arming of a reader can be carried out providing that the input
configured as
Arming Disabled
is not triggered, when these input is triggered
(active) every attempt to arm a reader will be rejected. The condition of
Arming
Disabled
input does not affects disarming of a reader.
6 . 5 . 1 .
E x a m p l e s
Example 1: Rearm the reader by presenting a TOGGLE user card.
•
Read your TOGGLE user card
•
Once accepted the reader grants you access and its LED SYSTEM starts
blinking
•
With the LED SYSTEM blinking, once more present your TOGGLE card
•
The reader changes its arming state (the LED STATUS
will change color)
Note: If the option
Access disabled when reader armed
is enabled and the
reader is in Armed mode, then in order to unlock a door first you will have to switch
the reader to Disarmed state (e.g. by presenting twice the TOGGLE card). Once the
reader is in Disarmed mode you may use any valid identifier to unlock a door.
Example 2: Rearm the reader by entering a TOGGLE user PIN code.
•
Key in the TOGGLE PIN code, use [#] key to mark an end of a PIN
•
Once accepted the reader grants you access and its LED SYSTEM starts
blinking
•
With the LED SYSTEM blinking, once again enter a TOGGLE PIN
•
The reader changes its arming state from Armed to Disarmed or vice versa
(LED STATUS
will change color)
Example 3: Rearm the reader when the
Card and PIN
mode is enabled.
•
Present your TOGGLE user card to the reader then key in the TOGGLE user PIN
•
Once accepted, the reader grants you access and its LED SYSTEM starts
blinking
•
With the LED SYSTEM blinking, once more present your TOGGLE card and
then enter a PIN
•
The reader changes its arming state from Armed to Disarmed or vice versa (the
LED STATUS
will change color)
6.6.
Unlocking a door
In order to unlock the door user is required to enter his identifier (card and/or PIN).
Whenever this happens, reader activates its LED SYSTEM and generates short
confirmation beep. After successful identification reader unlocks a door for
Door
