Rockwell Automation Publication KNX-TD005A-EN-P - October 2021
103
Common Accessories
Bulletin 2094 Shunt Module
The Bulletin 2094 shunt module (catalog number 2094-BSP2) is compatible with Kinetix 6000, Kinetix 6200, and Kinetix 6500 drive families. This
section contains specifications and mounting dimensions for the Bulletin 2094 shunt module.
Bulletin 2094 Shunt Module Features and Indicators
Catalog Number 2094-BSP2
Technical Specifications - Bulletin 2094 Shunt Module
The table below lists the power specifications for the Bulletin 2094 shunt module. Refer to
for tables with the Bulletin 2094 shunt module
in combination with an IAM module internal shunt (when present) and the various external passive shunt resistors available for 200V-class and
400V-class drive systems. Use these tables to determine the combination you need based on the requirements of your application.
For specifications and dimensions of external shunt resistors compatible with your Kinetix 6000 or Kinetix 6200 drive, refer to External Shunt
Modules beginning on
.
IMPORTANT
The 2094-BSP2 shunt module is compatible with all 200V-class and 400V-class systems, however, the 2094-BSP2 shunt
module is physically larger than the 200V-class drives and additional clearance is required beneath and in front of the
module.
Shunt Module Power Specifications
Shunt Module
Cat. No.
Drive Voltage
V AC
Resistance
Ω
Peak Power
kW
Peak
Current
A
Continuous
Power
W
Capacitance
F
Short Circuit Current
Rating
A
Fuse Replacement
2094-BSP2
230
28.75
5.7
14
200
470
200,000 symmetrical
N/A
(no internal fuse)
460
22.5
28
1 2 3
1 2
INT
DC+
TS2
TS1
2
3
1
5
6
7
4
Shunt Module
(front view)
Shunt Module
(top view)
Item
Description
1
Motor cable shield clamp
2
External shunt resistor (RC) connector
3
External thermal switch (TS) connector
4
Mounting screw
5
Shunt fault status indicator
6
Over-temp fault status indicator
7
Bus status indicator
