Rockford Systems, LLC
62
Call: 1-800-922-7533
SSC-1500 Part Revolution Solid-State Control
SECTION 4—PROGRAMMING
HOW TO PROGRAM THE VARIABLE SPEED TOP-STOP SETTINGS
(continued)
To turn the variable speed top-stop settings ON or OFF, press
ENTER
when the double arrow symbol (>>) is next to VAR TS ON/OFF. The
programming screen shown in Figure 4.58 will be displayed (if OFF is
chosen). Use the
↓
and
↑
on the keypad to toggle the setting between
ON and OFF. Press
ENTER
when finished.
Use the
↓
and
↑
on the keypad to scroll through the variable speed
top-stop settings options. Press
ENTER
when the double arrow
symbol (>>) is next to the variable speed setting to be programmed.
A programming screen similar to Figures 4.59 and 4.60 will be
displayed. Use the numeric keypad to enter the degrees and SPM. Do
this for all six (6) locations. Press
ENTER
to finish.
Press
ESC
to return to the MAIN PROGRAM SCREEN.
Figure 4.56
Third Variable Speed Top-Stop Settings Screen
>>VAR TS #4 SPM
VAR TS #5 ANGLE
VAR TS #5 SPM
VAR TS #6 ANGLE
Figure 4.57
Fourth Variable Speed Top-Stop Settings Screen
>>VAR TS #6 SPM
Figure 4.58
Variable Speed Top-Stop Settings ON/OFF Screen
PROGRAMMING:
VAR T-Stop ON/OFF
OFF
Figure 4.59
Variable Speed #1 Angle Screen
PROGRAMMING:
VAR TS #1 ANGLE
330_ Degrees
Figure 4.60
Variable Speed #1 Speed Screen
PROGRAMMING:
VAR TS #1 SPM
20_ SPM
