Rockford Systems, LLC.
Call: 1-800-922-7533
55
SSC-1500 Part Revolution Solid-State Control
SECTION 4—PROGRAMMING
HOW TO PROGRAM THE ANGLE SETTINGS
(continued)
After the correct security code has been entered, the ANGLE SETTINGS
SCREEN will be displayed. See Figure 4.44.
Use
↓
and
↑
on the keypad to scroll through the angle settings. Press
ENTER
when the arrow symbol (>) is next to the angle setting you want
to program. A screen similar to the one shown in Figure 4.45 will be
displayed.
Use the numeric keypad to enter a new angle. Press
ENTER
when finished.
Press
ESC
when finished to return to the MAIN PROGRAM SCREEN.
Figure 4.44
Angle Settings Screen
>Cont. T-Stop Angle
SS T-Stop Angle
Auto Up Angle
LC Mute Angle
Figure 4.45
Example of a Programming Screen
PROGRAMMING:
SS T-Stop Angle
330_ Degrees
