Chapter 10-3
Robomow City 120
10.4 Maintenance of the Outer Housing
Use only a damp cloth and a dry brush to clean the outer surfaces of
Robomow. A cloth may be soaked in a light detergent diluted with water,
and then wringed dry for using on Robomow.
c
IMPORTANT
c
Never use harsh or abrasive cleaning solutions. Never
spray with a garden hose or other type of liquid spray hose.
10.5 Maintenance of the Power Pack
Always follow the maintenance and charging instructions for the Power
Pack (see chapter 6).
10.6 Disposing the Old Battery Pack
c
IMPORTANT
c
Do not place used batteries in your household
trash. The battery must be collected, recycled, or disposed of in an
environmentally sound manner. Return the old power pack to an approved
sealed lead (acid) battery recycler.
10.7 Splicing the Perimeter Wire
If the perimeter wire needs to be spliced: Use the connectors supplied in
Robomow’s box. It is waterproof and gives a reliable electrical connection.
P
Strip 1cm (0.5 inch) of each wire end together
P
Twist the stripped ends together using pliers.
P
Insert the twisted wires into the splicing connector.
P
Screw the wire connector on the twisted wires; make sure it is tight.
c
IMPORTANT
c
Neither
Twisted cables,
nor
a screw terminal
insulated with insulation tape are a satisfactory splice.
Soil moisture will cause such conductors to oxidize and which later leads to
a broken circuit.
