Chapter 6-3
Charging
6.3 Power Management and Charging Alerts
6.3.1 The Power Pack should be fully charged before starting any
operation.
P
Verify that the Power Pack is fully charged before operating it.
P
Check for any excessive energy consumers like: dull blades, or heavy
grass accumulation around the blades.
To even increase energy efficiency
6.3.2 Robomow operates under two run-time modes
Robomow’s Power Management System helps protecting its battery.
P
Robomow should always be either charging or in operation.
)
If Robomow is neither charging nor operating, it will give a
warning, reminding the user to charge it.
)
If Robomow is not connected to the charging outlet within a
specific period of time, it will enter a “deep sleep” mode in
order to conserve power.
)
In order to wake Robomow up from its deep sleep mode:
remove the Power Pack for 10 seconds and then reinsert it.
6.4 Off-season storage
Preparing Robomow for off-season storage:
P
Fully charge the Power Pack.
P
Remove Power Pack from Robomow and store it in a dry location at
room temperature.
The Power Pack may be left in a garage or a shed if the temperature there will not
drop below -20 ºC (-4ºF).
P
Recharge the Power Pack every three months while in storage.
c
Important
c
For further details of winter storage, please refer to section
10.9.
