Robomow City 120 Скачать руководство пользователя

Страница: 30 / 76

Chapter 3-1

Robomow City 120

Chapter 3

Preparing Robomow

Before using Robomow for the first time, you have to perform some simple
preliminary settings. Once preparations are completed, your Robomow is set
and ready to mow your lawn.

3.1 Inserting Power Pack Fuse

Your Robomow is shipped with the Power Pack fuse removed.

The fuse is packed in a plastic bag attached to the top of the Power Pack.

Remove the fuse from the small plastic bag attached to the top of the

Power Pack.

Remove the Power Pack from Robomow.

Insert the fuse into the fuse holder.

The fuse can be inserted in either direction.

Carefully lower the Power Pack back into the Robomow

The Robomow now will power up (wake up).

The Power Pack is charged at the factory and has plenty of power to perform

the initial setup and test run.

Important

After the initial set-up process is completed the Power Pack

needs to be charged for a full 20 hours before the first operation.

See Chapter 6, Charging

3.2 Setting Country and first-time calibration

Robomow uses a sophisticated navigation system. An onboard compass-like

device responds to earth’ magnetic poles. In order to adjust to the variance in

the magnetic North, it is necessary to calibrate Robomow to your geographic

location.

This is a one-time procedure. It needs not be repeated unless the mower is

moved several hundred kilometers away.
The calibration process is simple. Robomow will ask for it before the first time

it is used in the automatic mode. It will lead you through the process.

Remove the Manual Controller from its holder and grasp it with both

hands.

To remove Manual Controller: push it up with your finger inserted in the indentation to

its left.
As a safety feature, Robomow operates manually

only

when the Manual Controller is

removed from its holder.

Then, in order to return to Automatic mode, the Manual Controller has to be returned

to its holder and adjusted until it is at level with top of Robomow.

Use the Navigation Button

on Manual Controller to drive Robomow

to an inner flat and smooth area of the lawn.

)

Press the navigation button’s arrows

in order to drive to

the desired direction.

Important

Forward and reverse directions correspond to your position

when standing behind Robomow.

Insert the Power Pack fuse into

the fuse holder. The fuse can

be inserted in either direction

Contacts

Remove the Power Pack

from Robomow

Содержание City 120













































































Результаты поиска

Содержание City 120

Отзывы:

Похожие инструкции для City 120

Бренды по названию

Популярные бренды

Robomow City 120, Инструкция по эксплуатации и безопасности

Результаты поиска

Содержание City 120

Отзывы:

Похожие инструкции для City 120

Бренды по названию

Популярные бренды