Turning on a SDM-6000 System • 88
4 . In a single station system, the Function Tab will be on the screen when the
SDM-6000 is powered up.:
Figure 51: Single Station Screen at Power Up, No Connected Instruments
In a multi-station system, the Function Tab will be on the screen on the master
station and the slave stations’ screens will indicate the information normally
shown on the Unit Tab.
Figure 52:Multi-Station Screens at Power Up, No Connected Instruments
5 . The Station/Instrument Indicator(s) along the bottom of a single station
system’s or master station’s Function Tab corresponding to each connected
SDM-6000 will be will be white. For a single station system, only the leftmost
indicator will be white. Any indicators that are light gray mean that there is not
an SDM-6000 connected to the system in that position. The indicators in the
Master Station Function Tab above show that two SDM-6000s are connected
in this system.
6 . The SD card logo in the bottom left corner of the Function Tab will indicate if an
Function Tab, Master Station
Slave Station(s)