15 • SDM-6000 Components
Mating Slave Connections
The right side of the SDM-6000 is shipped from the factory with a small panel
attached to it with two screws. That panel should remain in place if the SDM-6000 is
being used alone or if it is the right-most station in a bank of connected stations. The
panel needs to be removed in order to connect another SDM-6000 to it. Beneath the
panel is a mating electrical connection and plugged mating sample fitting
connections.
Mating
Sample
Fittings,
Plugged
Panel Rem oved
Panel In Place
Mating
Electrical
Connection
Panel
Figure 8: Right Panel Component Location