FANTEC MWiD25-DS
Wireless Docking Station
Quick Start Guide
The FANTEC MWiD25-DS mobile wireless Docking Station enables wireless access to your videos, music, photos and data and allows
you to stream everything to your iPad®, iPhone®, tablet, Smartphone or notebook. Cords and cables are not needed anymore. With this
additional Docking Station storage, you do not have to worry about running out of space on your mobile device.
For maximum portability, the mobile wireless Docking Station has a built-in rechargeable Li-Ion battery. You can charge it at any available
USB port on your computer or with your Smartphone’s power adapter with Micro USB connector. The mobile wireless Docking Station can
be accessed while the battery is charged.
1. Device Information and LED Indication
Battery LED:
LED Off:
The device is switched-off
Green Steady Light:
Battery is fully charged
Green Slowly Blinking:
Battery charging
Green Blinking Fast:
Device Shutting-Down
Red Steady Light:
Less than 30% available power
Red Blinking Fast:
Will soon shut-down, must be
charged immediately
Read/Write LED:
Blue Steady Light:
Ready to use
Blue Blinking:
Read/Write activities
WiFi LED:
LED Off:
The device is switched-off
Blue Flashing:
Starts the Initialization process
Blue Steady Light:
a) Initialization process completed
b) Ready to use
c) WiFi signal is normal
WAN LED:
LED off:
No connection established
Green Steady Light:
Good signal
2. Device Interface
Micro USB Interface
The built-
in Micro USB 2.0 is for data transfer and charging the internal battery when connected directly into the computer’s USB port or wall
chargers. For charging you can also use a USB charge adaptor with 0.5A or for faster charging use a USB charge adaptor with 1A or 2A.
USB Host Interface
The built-in USB 2.0 Host Interface for connecting any USB Mass Storage device and for charging mobile devices such as smartphones,
MP3 Players, and tablets.
Locate the USB port on the device. Simply insert the any USB Mass Storage device including Flash
Drives, External Hard Drive and card readers into the USB port of the device as seen the image left. Press
the power button to switch on the device. Wait for few seconds to complete the initialization process and
your USB external storage is ready to use.
SD Card Slot
Available SD slot to support SD, SDHC, and SDXC. SD adapter is needed to support Micro SD and Mini SD.
Installing the SD memory card is very simple. Locate the SD memory card slot. Simply insert the memory card
as seen on the image left. Gently push the memory card all the way in until it locks into its place. Press the
power button to switch on the device. Wait for few seconds to complete the initialization process and your SD
memory card is ready to use.
3. Client App for iOS and Android
1.
Search and locate the free “FANTEC MWiD25” app
at Apple App Store or Google Play Store.
2. Once the installation process has been completed, the “FANTEC MWiD25” app can be found on the desktop.
4. Wireless connect the WiFi Docking Station to your iPhone/iPad/Smartphone/Tablet
1. Turn-on the WiFi Docking Station. Wait for few moments to complete the booting process. The blue WiFi LED on the device should remain
solid indicating that the initialization process has been completed.
2. Turn-on your iOS/Android device.
Click on the “Settings” icon on the desktop, then on the “WiFi” option. Inside of the WiFi Network, the
SSID “WiFiSD-XXXX” should appear on the list. Click on the “WiFiSD-
XXXX
” as seen on the image below. The 4 characters
“XXXX”
represent the 4 last digits of the device’s MAC-Address. The WPA2 key is: 11111111
Once the “WiFiSD -XXXX” is connected, a check mark will appear before the SSID or the WiFi logo display as “Connected”.
5. User Login
1. Click on the “FANTEC MWiD25” icon to launch the app
as seen on the image below.
2. Enter the password
“admin”.
The password is only required during the first login.
The device remembers the password and
there is no need to enter it again.
3. Once the password has been entered correctly,
you will be automatically connected to
the “My WiDisk”.
The “My WiDisk” is the MWiD25-DS storage device.
Note:
For more information on handling, configuration and operation, please read the manual!
License information: This product contains free software which is licensed under the GNU General Public License.
Please download the GPL source code for FANTEC MWiD25-DS here:
www.fantec.de/unternehmen/bestimmungenrichtlinien/gnu-general-public-license/
