41 • Setting Basic Operational Parameters in the Config Menu
Auto Print
The printer must be connected for the Auto Print parameter to have any function. If
Auto Print is selected, the SDM-6000 will automatically print bump test results at the
end of a bump test. If Auto Print is not selected, the SDM-6000 will not automatically
print bump test results but the results can still be printed by pressing the Print button
at the end of a bump test.
Viewing or Changing the Bump Parameters
Do the following to set the bump test parameters.
1 . Turn on the SDM-6000 system. The Function Tab will be displayed on a single
station system’s screen or on the master station’s screen in a multi-station
system.
2 . Press the Config button. If Password is set to on (factory setting is off), you will
be prompted for a password. Enter the password and press OK to continue.
