59 • Setting Detailed Operational Parameters Using the SDM-PC2 Docking
c. You will be prompted to confirm the new password. Reenter the new
password and press OK to proceed or Cancel to return to the Password
Menu.
7 . You will be returned to the Password Menu.
8 . Press the return button to return to the Configuration Menu.
Setting Detailed Operational Parameters Using the
SDM-PC2 Docking Station PC Controller Program
The SDM-PC2 Docking Station PC Controller Program allows you to change more
detailed parameters that affect the operation of the SDM-6000 in Standalone Mode.
These parameters are not available for editing in any of the SDM-6000’s Standalone
Mode menu screens. The parameters that affect standalone operation but are only
accessible using the PC Controller program are:
•
Data Logger:
•
set up the SDM-6000 to automatically download the GX-6000’s logger data
to the SD card every time it’s turned on or at an interval
•
enable or disable manual downloading of the GX-6000’s logger data to the
SD card
•
Power Saving: select how much time goes by before the GX-6000 is
automatically turned off after a successful test and after the last button push
•
Expiration Date: select how many days prior to when a calibration is due that the
“Cal Limit Soon” message appears and how many days prior to a cylinder’s
expiration date that the cylinder icon turns yellow
•
Automatic Execution: set up what day(s)/time the SDM-6000 will automatically
bump test, calibrate, or alarm check an installed GX-6000
•
Cylinders Tab: enter cylinder information including an expiration date
See the following sections for instructions to update these parameters.
