Setting Detailed Operational Parameters Using the SDM-PC2 Docking Station PC
4. Double click the line (or single click the line and click
Edit
) that corresponds
with the gas inlet you’d like to set up. For example, double click line 3 (or single
click line 3 and click
Edit
) to set up a cylinder for the GAS 3 inlet on the
SDM-6000 or SV-3. The Cylinder Detail window will display.
Figure 37: Cylinder Detail Window
5. Click in the
Name
field and type in a name for the cylinder. Use something
descriptive that will help you distinguish it from other cylinders. You can also
select a pre-defined cylinder and then edit the name that is automatically
generated.
6 . If you want to enter a part number for the cylinder, click in the
Part No
field and
type in a part number. This field is normally used for an RKI part number.