Ridder NoNa+, Инструкция по установке и эксплуатации

Страница: 50 / 72

6 Operation
As soon as the dealer has prepared the NoNa
+
for use, you can operate the NoNa
+
.
This section first explains how to operate the power switch and the NoNa
+
pumps.
After that, you will find instructions on how to operate the HortiMaX-Go!‘s sodium
removal program. Finally, you will find information about keeping the stack moist.
6.1 Power switch
The power switch is located on the NoNa
+
cabinet.
Figure 6-1: The power switch
Operation:
Turn to position I (on) to switch on the NoNa
+
.
Turn to position 0 (off) to switch off the NoNa
+
.
The power switch can also be used as an emergency stop. Turn the switch to
the 0 (off) position to switch the NoNa
+
off immediately.
6.2 Operating the pumps
The knobs to operate the drain water and wastewater pumps is located on the cabinet.
The knobs have three modes of operation: automatic, off and manual.
Pump automatic mode
The automatic mode means that the NoNa
+
is in
operation. In this mode, the controller can switch the
pump on and off automatically as needed.
NoNa
+
50