Ridder NoNa+, Инструкция по установке и эксплуатации

Страница: 45 / 72

5.3.3 Network address
If the HortiMaX-Go! has been connected to the network correctly, the IP address will
be retrieved automatically. The system uses the router's DHCP service to set the IP
address. It is not possible to set the IP address manually.
The network data can be found on the network settings screen ' '.
Figure 5-5: Network settings
Switch the Obtain IP address automatically setting to 'Yes'.
Check whether the IP addresses have been entered.
If this is not the case, make sure that the cables are connected correctly and that the
router is set to DHCP server. If necessary, contact your network administrator.
5.3.4 Physical components (purple tiles)
The purple tiles represent the physical components (connected devices) in the
system. Certain devices have specific properties or configuration settings ‘
' that you
can change. For other devices, you can only view data on the readout screen ‘ '.
Figure 5-6: Example of purple tiles
NoNa
+
45