Ridder NoNa+, Инструкция по установке и эксплуатации

Страница: 38 / 72

4.6.4 Connecting the I/O modules
To connect the I/O modules (Smart Switches), you need to set the DIP switch
addresses.
For more information about Smart Switches, please refer to the “Smart
Switch inserts".
DIP switch
Up to 32 Smart Switches can be connected to the HortiMaX-Go!. The first step is to
assign addresses to the Smart Switches. Each Smart Switch requires a unique
address. This address is set using the DIP switch. By moving the small toggle
switches (or 'DIPs') up or down, you can set a binary number that will be used as the
Smart Switch address.
Figure 4-3: DIP switch
DIP switches 4, 5, 6, 7 and 8 determine the unique address or ID number of the Smart
Switch (called 'DIP switch position’ in the software). This ID number may only occur
once in each HortiMaX-Go! system.
Using the address list provided, you can set a unique address or DIP switch position
for each Smart Switch. Place the product sticker of the Smart Switch in an available
spot on the address list. Then adjust the DIPs up or down as needed, so that the DIP
switch position matches the address you have chosen on the address list.
4.6.5 Connecting CloudBoX
At help.hortimax-go.com you will find a step-by-step plan for installing the
CloudBoX and commissioning the CloudPortal. You can also consult and download the
following manuals:
CloudBoX Quick Start Guide
CloudPortal User Manual
NoNa
+
38