Ridder NoNa+, Инструкция по установке и эксплуатации

Страница: 40 / 72

Click the Product info button. (You can
find product info in the menu on the
left.)
Select the software (NoNa
+
) until you
reach the Product Gallery Page .
Click the Versions tab.
Here you can see the latest version of the
software.
5.2 Software configuration
The NoNa
+
is controlled by a HortiMaX-Go!. This has been pre-configured by Ridder
Growing Solutions. This means that the display language, unit of measurement and
controller type have been set and scanned for Smart Switches.
If you want to change the display language, tap the System Time icon ' ' and
navigate this path: .
If you want to change the unit of measurement, you will need to reset the
HortiMaX-Go! back to the factory settings. If the HortiMaX-Go! is reset to the
factory settings, then:
you will lose your usage history
you will need to configure the HortiMaX-Go! (to do this, complete the
steps in this section and the section "Software settings" on page 43).
5.2.1 New start
Complete the steps in this section if you need to reconfigure the HortiMaX-
Go!.
If you need to reconfigure the NoNa
+
, you will be taken to the start-up menu.
EXAMPLE
Figure 5-1: Start-up menu
NoNa
+
40