Ridder NoNa+, Инструкция по установке и эксплуатации

Страница: 43 / 72

5.3 Software settings
After scanning is complete, the system is updated with all the functions necessary to
control the climate and irrigation equipment in your greenhouse. (These functions are
collectively referred to as the controls.) A number of software settings have been
preset. To access the software settings, tap the System Time icon ‘ '.
Figure 5-4: Tap the System Time icon to open the configuration menu.
To access the software settings, navigate this path: .
Please check the following settings:
Time Required for time-related settings, such as: system date/time , time
format and time zone .
Location The system's location is necessary in order to determine the sunrise
and sunset times.
Network address If a network is required, you need to check your network
settings.
Physical components Various controls have purple tiles representing the
physical components.
5.3.1 Time
The system time needs to be set correctly in order to ensure that automatic control
actions are performed at the right times. You can find the required settings on the
settings screen '
'.
The time-related settings are:
System date/time The system date/time is displayed automatically. Check
whether the System date/time setting is correct.
Time format You can choose from a 12-hour format (using AM and PM) or a
24-hour format. Set the Time format setting to the desired time format.
Time zone You need to specify your current time zone and the UTC offset
(compensation) for your location.
NoNa
+
43