C O M M A N D S
Switch Commands
350-10035-01 v4.1.1
Linx DVI Matrix Switchers User’s Guide
58
6.7 Switch Commands
Table 6-6
Switch Commands
Command
Arguments
Description
AUTOPROBE
<ON | OFF>
Enables/disables the probe of source devices for
their KSV FIFO depth. Turning it on will result in long
acquisition times for HDCP devices the first time they
are attached, but will result in an optimized system
for the subsequent authentication of downstream
displays.
Example:
To enable the automatic probe, use the
command:
autoprobe on
DATAR
a
NGEX
pand
<INPUT | OUTPUT>
<1...32 | ALL>
[ON | OFF]
When set ON, the HDMI transmitter expands the
range of pixel data values from 16-235 into full 8-bit
range of 0-255.
Example:
To expand the data range for all outputs,
enter the command:
datarngex output all on
Default:
OFF
DOWNSAMPLE
<INPUT | OUTPUT>
<1...32 | ALL>
[ON | OFF]
Downsamples a 4:4:4 signal to 4:2:2 to correct
output color. The DOWNSAMPLE and UPSAMPLE
commands are mutually exclusive. Downsampling is
normally performed on input ports; where a unique
display device requires it, downsampling may be
applied to an output port.
Example:
To downsample all inputs, type:
downsample input all on
Default:
OFF
D
vi
O
utput
D
isable
[output #]
Disable the DVI output for the specified port.
Example:
To disable output 7, enter the command:
dod 7
Without an argument, the current state is returned.
D
vi
O
utput
E
nable
[output #]
Enable the DVI output for the specified port.
Example:
To enable the output on port 11, type:
doe 11
Without an argument, the current state is displayed.
