W E B C O N T R O L P A N E L O P E R A T I O N
Load Preset
350-10035-01 v4.1.1
Linx DVI Matrix Switchers User’s Guide
37
To load an existing preset, click the load preset icon. The window shown in
Figure 4-9
is displayed.
Figure 4-9 Load Preset Window
Use the following procedure to load an existing preset.
1. Select a preset number, 1 to 100, from the drop-down list. If a preset has been named, the
name will be displayed along with the number.
2. Check
Preview preset’s routing
to display the indicated preset in the WCP routing window as
required. The pending preset will show in the “current routing” window with crosspoints in red.
3. Click
Load
. The crosspoints will turn green.
Clicking on the create preset icon opens a small presets window and changes the WCP to ‘Create
Preset’ mode. Presets can be created and viewed from this window but cannot be loaded.
Figure 4-10 Create Preset Window
Use this procedure for creating a preset.
1. Select a preset number from the drop-down list.
2. Check
Show preset’s routing
as required.
3. Use the routing matrix to define a new preset. Selections are indicated by a red dot.
4.4 Load Preset
4.5 Create Preset
