REXROTH RD 500 Series, Руководство по применению

Страница: 31 / 276

RD 500 RD51 Description of RD51
2-11
DOK-RD500*RD51*******-IB04-EN-P
Note: The drive control units may only be operated with the
accessories and mounted components specified in the RD
500 documentation. Components that are not explicitly
mentioned may be neither attached nor connected. The same
is true for cables and lines.
Operation may be carried out only in the explicitly mentioned
configurations and combinations of the component and with
the software and firmware specified in the corresponding
description of functions.
Every drive control unit must be programmed before it is commissioned
so that the motor is controlled corresponding to the specific functions for
the application.
Equipment types with various drive outputs and different interfaces are
available for application-specific use.
Typical applications include:
•
Chemical and process technology,
•
Machine tools,
•
Hoist- and Conveyor technology,
•
Handling and assembly systems, and
•
Packing and foodstuff machines.
The drive control unit may only be operated under the specified mounting
and installation conditions, in the specified mounting position and under
the specified ambient conditions (temperature, degree of protection,
humidity, EMC etc.).
Improper use
The use of the drive control units in other applications than those
specified or described in the documentation and technical data is
considered as "improper".
Drive control units may not be used if they
•
are exposed to operating conditions that do not fulfill the prescribed
ambient conditions. For example, operation under water, under
extreme variations in temperature or under extreme maximum
temperatures is prohibited.
•
are used for applications which have not been clearly released by
Bosch Rexroth. In this regard, it is required that you refer to the
statements in the general notes regarding safety!