REXROTH RD 500 Series, Руководство по применению

Страница: 217 / 276

RD 500 RD51 Parameter Value Assignment
8-1
DOK-RD500*RD51*******-IB04-EN-P
8 Parameter Value Assignment
8.1 Parameterization
The RD 500 series can be parameterized with two possibilities:
1. Basic parameterization: The operator has pre-defined parameters in
the "basic parameterization". It is menu-prompted, and it allows many
applications to be quickly set in a user-friendly fashion. It is selected
in the condition when supplied from the factory. The basic
parameterization is selected in the condition when supplied from the
factory. Only the description of the "basic parameterization" is
provided in this chapter.
2. Free parameterization: In addition to the basic functions, logic gates,
comparators, a technology controller, several multi-function blocks,
etc. are provided. The description of the free parameterization is
provided in the documentation “DOK-RD500*-RD51*xxVRS*-FK0x-
EN-P – function charts and parameter lists”.
Parameterization Structure
Parameterization comprises three main menus:
Selected parameters for fast start-up (motor adaptation, ramp-up / ramp-
down time, etc.)
Menu-prompted, individual adaptation of the converter
The adaptation possibilities can be directly selected.
The main parameterization menu is displayed by pressing the
Prog
key.
The main menu is subdivided again into additional levels. The structure of
the various menu levels is shown in the following diagram.
Quick setup:
Prompted parameterization:
Numerical list: