Renesas E100 Скачать руководство пользователя страница 23

Страница: 23 / 232

R0E417250MCU00 User

’s Manual

1. Outline

R20UT3587EJ0302 Rev.3.02

Page 23 of 232

Sep.01. 21

1.5 Operating Environment

Make sure to use this emulator in the operating environments listed in Tables 1.6 to 1.8.

Table 1.6 Operating environmental conditions

Item

Description

Operating temperature

5 to 35°C (no condensation)

Storage temperature

-10 to 60°C (no condensation)

Table 1.7 Operating environment of the host machine (Windows® XP or Windows® 2000)

Item

Description

Host machine

IBM PC/AT compatible [*1]

Windows® XP 32-bit editions [*1] [*3]
Windows® 2000 [*1]

CPU

Pentium 4 running at 1.6 GHz or more recommended

Interface

USB 2.0 [*2]

Memory

768 Mbytes or larger (more than 10 times the file size of the load module)
recommended

Pointing device such as mouse

Mouse or any other pointing device usable with the above OS that can be
connected to the host machine

CD drive

Needed to install the emulator debugger or refer to the user’s manual

Table 1.8 Operating environment of the host machine (Windows Vista®)

Item

Description

Host machine

IBM PC/AT compatible [*1]

Windows Vista® 32-bit editions [*1] [*4]

CPU

Pentium 4 running at 3GHz or
Core 2 Duo running at 1GHz or more recommended

Interface

USB 2.0 [*2]

Memory

1.5 Gbytes or larger (more than 10 times the file size of the load module)
recommended

Pointing device such as mouse

Mouse or any other pointing device usable with the above OS that can be
connected to the host machine

CD drive

Needed to install the emulator debugger or refer to the user’s manual

Notes:

*1: Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries. All other company or product names are the property of their respective owners.

*2: Operation with all combinations of host machine, USB device and USB hub is not guaranteed for the USB interface.

*3: The 64-bit editions of Windows® XP are not supported.

*4: The 64-bit editions of Windows Vista® are not supported.

Содержание E100









































































































































































































































Результаты поиска

Содержание E100

Отзывы:

Renesas E100, Руководство пользователя, Страница: 23 / 232

Результаты поиска

Содержание E100

Отзывы: