Fundamental safety instructions
Operating_Manual_Fan_KXE_04_en.docx
18 / 128
The operating company and/or plant manufacturer is
responsible for:
-
the necessary protective measures on site, such as
barriers, enclosures, working platforms
- provision of personal protective equipment
- ensuring use of the fan as intended
- protection of the motor against overload and
overheating
- transport, installation and commissioning of the fan
- inspections, maintenance, repairs on the fan and its
accessories to ensure correct functioning
- rectification of faults
- decommissioning, recommissioning, dismantling and
disposal of the fan
NOTICE!
Refer to further obligations of the operating company
outlined in chapter 8.7 Electrical connection.
If the fan is not installed in the plant within three months
following delivery, the operating company and/or the plant
manufacturer is responsible for correct intermediate storage
of the fan and its accessories.
NOTICE!
Refer to the separate instructions for storage and
corrosion protection for fans.
The control system of the plant in which the fan is installed
must be configured to ensure that no hazards are posed in
the event of the power supply failing, for example as a result
of inflow at inlet, back pressure or reverse flow at discharge.
Shut-off devices must be installed and incorporated in the
control system of the plant in order to prevent this hazardous
situation.
As the power supply is re-established, the original state must
be restored once again.
3.5 Obligations of the operating
company
3.5.1 Intermediate storage
3.5.2 Measures in the event of a
power failure
