Dismantling
Operating_Manual_Fan_KXE_04_en.docx
120 / 128
In the event that the fan is to be reassembled following
dismantling, please observe the following points:
- Mark the parts which fit together with one another prior
to commencing dismantling
- These parts must be fitted together in precisely the
same manner as was realised prior to dismantling
- Replace flattened or damaged seals with new seals
- Replace all worn or damaged parts
DANGER
Damaged fan or accessories!
Fatalities or extremely serious injuries resulting from
starting up damaged components.
→ Never use damaged parts.
→ Arrange for damaged parts to be repaired or replaced.
DANGER
Corroded, damaged or non-functioning parts!
Fatalities or extremely serious injuries from explosions
resulting from the generation of sparks. Damage to the fan.
→ Replace old parts with new parts.
→ Remove any accumulations of water from all fan parts.
→ Ensure adequate lubrication of bearings.
→ Observe the instructions in the chapters specified as
follows:
Chapter 8 Measures prior to commissioning
Chapter 9 Start-up
