Start-up
Operating_Manual_Fan_KXE_04_en.docx
76 / 128
Refer to the specifications on the motor nameplate.
WARNING
Motor and additional components of the power train!
Damage to the motor and to additional components of the
power train as a result of exceeding the specified values.
→ Observe the specifications of the motor manufacturer.
Gasproof fan configuration (optional):
If the fan has been constructed in a gasproof configuration,
perform a leak test following the power-up phase of the fan.
A “gasproof fan configuration” is signified on the fan data
sheet with the designation “gasproof” in the “configuration of
fan” column.
Use a suitable test medium (e.g. E-COLL leak finder spray)
for the leak test and spray it on the area being tested, e.g.
shaft seal, flange and all other connection points.
If leaks are detected, replace the respective components, for
example the flat seals between the flanges or the sealing
rings of the shaft seal.
