REITZ Design KXE Скачать руководство пользователя страница 6

Страница: 6 / 128

Preface

Operating_Manual_Fan_KXE_04_en.docx

6 / 128

Read the entire operating manual meticulously.
Should you have any questions or ambiguities, please

provide support and to clarify any queries.
This operating manual constitutes one part of the overall

documentation. The overall documentation must be made

available to the personnel appointed to operating and

maintenance works at all times.
Additional documents of the overall documentation include:

-  Fan data sheet
-  Spare parts list
-  Performance curve (optional)
-  General drawing of fan
-  Additional drawings (optional)
-  EC Declaration of Conformity or EC Declaration of

Incorporation

- Instructions for storage and corrosion protection for

fans

- Supplier documentation

This operating manual is intended exclusively for personnel

performing the following work on the fan:
Transport, mounting, commissioning and start-up, operation,

operating, troubleshooting, maintenance, repair, shutting-

down, dismantling, disposal.

All work on the fan must be carried out exclusively by

competent persons.

This operating manual must be diligently retained for

subsequent referral.

NOTICE!

This operating manual, as well as all documents

included in delivery must be accessible to all persons

involved with work on or with the fan at all times.

1. Preface

Содержание Design KXE

































































































































Результаты поиска

Содержание Design KXE

Отзывы:

Похожие инструкции для Design KXE

Бренды по названию

Популярные бренды

REITZ Design KXE, Оригинальное руководство пользователя

Результаты поиска

Содержание Design KXE

Отзывы:

Похожие инструкции для Design KXE

Бренды по названию

Популярные бренды