Introduction
Operating_Manual_Fan_KXE_04_en.docx
10 / 128
The fan is configured in conformity with the standards
specified as follows:
- DIN 24166 “Fans; technical delivery conditions”
(German Industrial Standard)
- VDMA 24167 “Ventilatoren –
Sicherheitsanforderungen”
(Industrial fans, safety requirements - VDMA –
Verband Deutscher Maschinen- und Anlagenbau eV –
German Engineering Federation)
- DIN EN ISO 12100 “Safety of machinery - General
principles for design”
- DIN EN ISO 12499 “Industrial fans - Mechanical safety
of fans - Guarding”
- DIN EN 60204-1 “Safety of machinery - Electrical
equipment of machines”
- DIN EN 61000-6-2 “Electromagnetic compatibility
(EMC) - Immunity standard for industrial environments”
- DIN EN 61000-6-4 “Electromagnetic compatibility
(EMC) - Emission standard for industrial environments”
The impeller has been balanced in accordance with
DIN ISO 1940-1 “Mechanical vibration - Balance quality
requirements for rotors in a constant (rigid) state”.
Fan configuration in accordance with ATEX (optional):
If the fan is intended for use in potentially explosive
environments pursuant to Directive 2014/34/EU (ATEX), the
fan complies additionally with the standards specified as
follows:
- DIN EN 1127-1 “Explosive atmospheres - Explosion
prevention and protection”
- DIN EN 14986 “Design of fans working in potentially
explosive atmospheres”
- DIN EN 13463-1 “Non-electrical equipment for use in
potentially explosive atmospheres”
- DIN EN 13463-5 “Non-electrical equipment for use in
potentially explosive atmospheres - Protection by
constructional safety 'c'”
2.4 Regulations and standards
