GENERAL INFORMATION
We are pleased that you have chosen a quality product from Regent. Regent products offer you best quality and proven techno
-
logy. In order to be able to take full advantage of the performance of your device and to enjoy your device for many years, please
read this user manual carefully before the first use of your machine. Operate the device according to the instructions on the follo
-
wing pages. These operating instructions contain basic information on how to operate, maintain and transport your Regent product
correctly. Operational safety and technical function of the device can only be guaranteed if the regulations of general security and
accident prevention of the legislator of your country and in addition also the the regulations of general security and
accident prevention of this operating manual are observed and followed. We accept no liability for damage caused by improper use or
incorrect operation. Misuse can lead to damage to the machine, loss of any guarantee or warranty claims and life-threatening situations.
Make sure that all persons operating the device have read and understood the operating instructions. The operator must be qualified for
operation, maintenance and safety requirements of the device. Keep the user manual safe and accessible so that they can be accessed
quickly if necessary. If you decide to sell the machine, hand over the operating instructions to the new owner.
If you have any questions about the device and when ordering spare parts, please state the model name, the year of production and
the serial number of your machine. You can find this information on the type plate of the machine, further information can be found in the
chapter CE MARKING & IDENTIFICATION.
Together with these operating instructions, you will be given a handling over declaration. Please fill out this document completely and re
-
turn it to Regent within 10 days. If you have not received the document, please contact your specialist dealer. The handover declaration
is directly related to the processing of any guarantee or warranty claims.
The information, illustrations and data in these operating instructions must correspond to the construction status of the machine delivered,
subject to errors and changes.
FOREWORD
Refer to the manual!
Do not step!
Do not enter the machine!
Risk of being crushed!
Do not reach into moving
parts!
Do not reach into rotating components!
Due to the flywheel effect, parts may
rotate even after the machine has been switched off!
Lifting point
Unless otherwise agreed in writing, the guarantee & warranty is li
-
mited to one year from the delivery date and includes the repair
or free replacement of the defective part, according to the manu
-
facturer‘s instructions. The scope of coverage does not include da
-
mage or injuries to persons or objects, as well as costs for labor and
freight forwarding. Before taking over your new machine, please
check that the device has not been damaged in transit and that
the accessories are undamaged and complete. If you find any
defects, please note this on your delivery document and report
the damage within 8 working days by registered mail. If parts are
replaced or repaired by the manufacturer or his authorized repre
-
sentative during the guarantee period, this does not mean that
the guarantee period for the replaced part or the device starts
again or is extended. The buyer can only assert guarantee and
warranty claims if he adheres to the conditions stated under the
point of guarantee in our general terms and conditions.
The guarantee is void if the device is damaged due to an acci-
dent, lack of care, insufficient maintenance, incorrect use, impro
-
per handling, the installation of spare parts or accessories that are
not officially approved by Regent, misuse or negligence (e.g. over
-
sized tractors).
GUARANTEE AND WARRANTY
BEFORE FIRST OPERATION
EXPIRY OF GUARANTEE AND WARRANTY
¾
Fill out the handling over declaration and return it to the ma-
nufacturer
¾
Read the operating instructions completely
¾
Check device for completeness according to delivery document
¾
Check device for damage
¾
Check all screws for tightness, retighten if necessary
¾
Lubricate all grease nipples, see lubrication schedule
¾
Lubricate moving parts without grease nipples (coupling bolts)
The CE marking and product-relevant data can be found on the
machine‘s type plate. The type plate can be found near the par
-
king support. If the type plate can no longer be found
because it has fallen off, you can order a replacement from a
Regent dealer. The serial
number is also stamped
on the the main frame
between the first and the
second plow body. Plea
-
se always have the data
on the nameplate ready
for inquiries or orders.
CE BRANDING & IDENTIFICATION
¾
A =
Machine model (equipment-dependent type designation)
¾
B = Serial number (five-digit identification number)
¾
C = Year of construction (regardless of delivery date)
¾
D = Total weight (including additional equipment when delivered)
PICTOGRAMS DECLERATION
3
www.regent.at
