TABLE OF CONTENTS
Translation of the original instructions!
Translation of the original instructions!
Subject to technical modifications; no responsibility is accepted for the accuracy of this information.
GENERAL INFORMATION
3
Foreword
3
Guarantee and warranty
3
Expiry of guarantee and warranty
3
Before first operation
3
CE branding & identification
3
Pictograms decleration
3
Intended use
4
Reasonably predictable misuse
4
Components
4
REGULATIONS OF GENERAL SECURITY AND
ACCIDENT PREVENTION
5
PREPARATIONS ON THE TRACTOR
6
Suitability of the tractor
6
Ballasting
6
Hitch rods
6
Tires
6
Electric hitch settings
6
Track gauge
7
Tire pressure
7
Lower link struts
7
COUPLING AND UNCOUPLING
8
Coupling
8
Uncoupling
8
Parking support strut
8
HYDRAULIC TURNING
9
Standard turn control
9
Sequence turn control
9
CUTTING WIDTH ADJUSTMENT
10
EUROSTAR- Manual cutting width adjustment
10
EUROSTAR - Change the cutting width
10
EUROSTAR - Alignment cylinder
10
TITAN- Hydraulic cutting width adjustment
11
TITAN- System „standard cutting width cylinder“ 11
TITAN- System „memory alignment cylinder“
11
TITAN- System „FTS- Frame turn swing system“
11
FRONT FURROW WIDTH
12
Basic setting
12
Fine setting
12
Manual front furrow width adjustment
12
Hydraulic front furrow width adjustment
12
PLOW PULL LINE
13
General & correct adjustment
13
Toplink points to the unplowed part of field
13
Toplink points to the plowed part of field
13
Setting Eurostar
13
Setting Titan (Standard & Memory cylinder)
13
Setting Titan (FTS Frame turn swing system)
13
CAMBER ADJUSTMENT
14
Camber spindle
14
Basic setting
14
Plowing up the slope
14
Sticky conditions
14
Dry conditions
14
WORKING DEPTH ADJUSTMENT
15
Basic setting
15
STANDARD OVERLOAD PROTECTION
15
Shear bolt
15
NON-STOP OVERLOAD PROTECTION
16
General 16
Non Stop- mechanically
16
Non Stop- hydraulic
16
PLOW BODY
17
Mouldboard 17
Mouldboard-tip
17
Landsides 17
Trunk-landsides
17
Landside plate / Landside protector
17
Deflector plate
17
Levelling Bar
18
Knife coulter
18
Wide furrow cutter
18
SUBSOIL DECOMPACTER MANDREL
18
System V-250 „screwed“ 18
System V-AS-250 „with locking pin“
19
SKIMMER
19
TRASHBOARDS
19
DISC COULTER
20
Basic setting
20
Standard version
20
Spring-suspended (for Non-Stop protection)
20
DUAL DEPTH WHEEL
21
Standard 21
Adjustment by levers
21
PENDULUM DEPTH WHEEL
21
Version „MG“
21
Version „SG-HVS“
22
Version „SG-HVS“+ Hydraulic depth adjustment“
22
DEPTH/TRANSPORT -SUPPORT WHEEL
23
Plow operation
23
Transport operation
23
Switch from plow- to transport operation
23
Switch from transport- to plow operation
23
MAINTENANCE
24
Wear parts
24
Cleaning of the device
24
Maintenance schedule
24
Lubricating plan and lubrication points
24
Operating fluids
24
PERSONAL NOTES
24
DECLARATION OF CONFORMITY
25
Version 22.01 / Editor: Xaver Hager, Mail: [email protected]
2
www.regent.at
