EN
Page 76 of 77
WIRING CONNECTION
DIAGRAM
KEY
1 – Green power supply cable L=2000
2 – Net filter
3 – Fuse
4 – Cable from switch to filter to transformer
5 – Tilting switch
6 – Line laser (with cable) (for GAR321 and GAR322)
7 – Fuse
8 – Transformer
9 – Automatic measuring device electronics kit
10 – Power card kit
11 – Monitor SBC kit
12 – Run-out push button cables (on GAR303)
13 – Run-out keyboard extension cable (on GAR303)
14 – Push-button panel with 1 key (on GAR303)
15 – Run-out ultrasound sensor cable extension (for
GAR303)
16 – Potentiometer with cable (on GAR303)
17 – Width potentiometer extension cable (on GAR303,
GAR305, GAR307)
18 – Width cables (on GAR303, GAR305)
19 – Potentiometer with shielded cable (on GAR307)
20 – Can Bus long extension cable
21 – Power supply cable assembly
22 – 90W motor with encoder (for versions with laser
spot) - DC motor (only versions without spot laser)
23 – Motor encoder cable (only versions with laser spot)
24 – Motor support ground cable
25 – Power supply cable
26 – Wheel position sensor cable
27 – Buffered encoder board
28 – Piezo with front cable
29 – Piezo with cable
30 – Lighting device
31 – Cable for solenoid valve SV-O (only for pneumatic
self-centring chuck versions)
32 – Cable for solenoid valve SV-C (only for pneumatic
self-centring chuck versions)
33 – Solenoid valve mounting (only for pneumatic self-
centring chuck versions)
34 – Cable for pedal micro (only for pneumatic self-
centring chuck versions)
35 – Limit switch (only for pneumatic self-centring chuck
versions)
36 – Cable for wheel micro protection
37 – Limit switch
38 – Potentiometer with cable
39 – Buffered optical line board
40 – HDMI-DVI cable
41 – Push-button panel with 7 keys cables
42 – 7-keys keyboard
43 – Touch screen monitor 20” HDMI
44 – Touch screen monitor 19”
45 – Cable from transformer to power supply
46 – Cable USB/A - USB/B
47 – Ultrasounds sensor extension cable (for GAR315,
GAR316, GAR338)
48 – Run-out card (for GAR315, GAR316, GAR338)
49 – Cable for ultrasounds (for GAR315, GAR316,
GAR338)
50 – Ultrasounds sensor (for GAR315, GAR316,
GAR338)
51 – Wiring diagram (for GAR334, GAR335)
52 – Printer kit
53 – Laser unit actuator
54 – Laser cable + laser assembly
55 – Ultrasounds sensor card (for wheel balancers with
automatic width or GAR332)
56 – Width card cable assembly (for wheel balancers
with automatic width or GAR332)
57 – Extension cable assembly (for wheel balancers with
automatic width or GAR332)
58 – Serial width card cable assembly (for wheel balanc-
ers with automatic width)
59 – Serial extension cable assembly (for wheel balanc-
ers with automatic width)
60 – Power supply cable USA plug
61 – Net filter
62 – Fuse
63 – Fuse
64 – HDMI-HDMI cable
Drawing N°A - Rev. 2
129705522
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
