EN
Page 28 of 77
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Fig. 37
4. Fit the protection cap (
Fig. 38 ref. 1
) in the locking
sleeve (
Fig. 38 ref. 2
) and bring everything against
the wheel.
Fig. 38
Lift the control pedal to close the chuck and then
clamp the wheel.
Some aluminium wheels, with very high centring, must
be fitted with the cone outside the wheel.
5. Clean the chuck before fitting the wheel.
6. Fit the wheel (
Fig. 39 ref. 3
) with the inside of the
rim towards the wheel balancer, until the wheel is
up against the support flange (
Fig. 39 ref. 2
).
Fig. 39
7. Fit the cone (
Fig. 40 ref. 3
) with the narrowest part
turned towards the wheel.
8. Fit the pressure ring (
Fig. 40 ref. 1
) in the locking
sleeve (
Fig. 40 ref. 2
) and bring everything against
the wheel.
Fig. 40
THE PRESSURE RING (FIG. 40
REF. 1) MUST BE FITTED WITH
THE TEETH OR DISCHARGE SIDE
FACING THE SLEEVE (FIG. 40
REF. 2).
Close the pneumatic chuck by lifting the appropriate
control pedal.
DURING CHUCK OPENING/CLOS-
ING OPERATIONS, BE CAREFUL
TO KEEP YOUR HANDS AND OTH-
ER PARTS OF THE BODY AWAY
FROM THE MOVING CHUCK.
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
