EN
Page 68 of 77
INSTRUCTION, USE AND
MAINTENANCE MANUAL
15.3.4 Mobile laser pointer calibration
(standard on some models)
To perform this calibration, you need two wheels with
a wide rim diameter difference, a small one measuring
13”/14”, and a large one measuring 18”/19”.
Press the button
(
Fig. 74 ref. 4
) to display the
following screen page on the monitor:
Mount the small wheel (13”/14” diameter) onto the
chuck and apply an adhesive weight in any point in-
side the rim. At the end of the operation press push
button
.
On the monitor the next screen page will be displayed:
Let the weights fitting gripper of the caliper come into
contact with the previously applied weight, by manu-
ally rotating the wheel too and taking care to bring it
into contact with the weight central area (see
Fig. 82
).
Fig. 82
Keep the caliper in position and press push button
. On the monitor the next screen page will be
displayed:
Use push button
or
and by manually
rotating the wheel too, make the laser pointer hit the
reference point previously taken, as showed in
Fig. 83
.
Fig. 83
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
