INSTRUCTION, USE AND
MAINTENANCE MANUAL
EN
Page 67 of 77
Move the tip of the width measuring device (
Fig. 81
ref. 1
) in line with the outer surface of the flange
(
Fig. 81 ref. 2
).
Fig. 81
(OPTIONAL)
Press button
. At the end of the operation, the
following screen will appear on the monitor:
The calibration of the external data gauge is finished.
Calibration of automatic width measuring device
unit (standard on some models)
Mount the sizing body onto the chuck and fix it through
the special locking devices.
Press the button
to display the following screen
page on the monitor:
Close the wheel cover until bringing the automatic
width sensor next to the sizing body previously in-
stalled.
Press button
. At the end of the operation, the
following screen will appear on the monitor:
The calibration of the automatic external data gauge
is finished.
1297-M005-03
RAVAGLIOLI S.p.A.
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
