EN
Page 20 of 77
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Fig. 18
9.2.6 Fitting of wheel external data gauge
(standard on some models)
1. Insert the 4 screws (
Fig.
19 ref. 1
) in the gauge
bracket (
Fig.
19 ref. 2
) and screw them on the
threaded rivets placed on the rear side of the frame.
Lock the gauge arm (
Fig.
19 ref. 3
) to the bracket
(
Fig.
19 ref. 2
) using the 2 screws (
Fig.
19 ref. 4
)
and the washers (
Fig.
19 ref. 5
). Lock the screws
(
Fig.
19 ref. 4
) with the washers (
Fig.
19 ref. 5
)
and the nuts (
Fig.
19 ref. 6
) so that the shaft and
the gauge arm are levelled out (see
Fig.
20)
.
Fig. 19
2. Also make sure the gauge tip (
Fig.
20 ref. 1
) is
positioned at the centre of the chuck.
Fig. 20
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
