EN
Page 46 of 77
INSTRUCTION, USE AND
MAINTENANCE MANUAL
14.7.6 ALU-S1
ALU-S1 function permits balancing wheels with light
alloy rims by fitting adhesive weights on the outer
side and weight with clip on inner side of wheel (at
“12 o'clock”).
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as described in Par. 14.5 (the inner weight
is with clip).
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
14.7.7 ALU-S2
ALU-S2 function permits balancing wheels with light
alloy rims by fitting two adhesive weights: one on the
outer and one on inner sides of the rim (the inner
weight is at 12 o’ clock).
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as described in Par. 14.5.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
14.7.8 ALU-1
ALU-1 function permits balancing wheels with light
alloy rims by fitting adhesive weights on the outer and
inner sides of the rim at “12 o'clock”.
Enter the measurements (see Par. 14.2.1 or 14.6.1)
and proceed as described in Par. 14.5.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
14.7.9 ALU-2
ALU-2 function balances wheels with light alloy rims
by fitting adhesive weights on the outside and inside
of the rim. The position of the outer weight is not vis-
ible but hidden inside. Enter the measurements (see
Par. 14.2.1 or 14.6.1) and proceed as for dynamic
unbalance.
At the end of the procedure, the wheel balancing condi-
tions can be checked by performing a trial spin.
The procedure has now been completed.
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
