EN
Page 30 of 77
INSTRUCTION, USE AND
MAINTENANCE MANUAL
12.4 Correct positioning of the ultra-
sound Run- out detecting device
(optional on some models)
To make sure that the rim/tyre “Run-out” detection is
correct, place the device as shown in
Fig.
_
45
:
place
the measurement sensor so that it is turned towards
tyre centre line.
Fig. 45
13.0 CONTROL PANEL
The wheel balancers are equipped with a control
panel with a 7-key-keyboard (
Fig. 46A ref. 1
) or, on
demand, with a touch control panel (
Fig. 46B ref. 1
)
(for touch screen monitor).
On both the control panels are displayed all the in-
structions for the correct wheel balancing, for example
indicating where the operator shall fit adhesive or clip
weights and the balancing mode and/or option used, as
well as correct wheel rotation for inner/outer weights
positioning.
TO INTERACT/OPERATE THE CON-
TROLS PRESENTED IN GRAPHI-
CAL FORM ON THE MONITOR, IN
THE VERSION WITH CONTROL
PANEL WITH KEYBOARD, PRESS
ON THE RELEVANT KEY ON THE
LOWER KEYBOARD, WHEREAS
PRESS DIRECTLY ON THE ICON
PRESENTED IN GRAPHICAL FORM
ON THE MONITOR ITSELF IN CASE
OF TOUCH CONTROL PANEL (ON
DEMAND).
Fig. 46A
KEY
1 – Monitor
2 – Function push button (red)
3 – Function push button (yellow)
4 – Function push button (grey)
5 – Function push button (blue)
6 – Function push button (green)
7 – Previous page push button
8 – Next page/print push button
9 – Push button panel (keyboard with 7 keys)
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
