EN
Page 42 of 77
INSTRUCTION, USE AND
MAINTENANCE MANUAL
•
Weights fitting with fixed laser at “6 o’ clock”
(optional on some models).
ON DELIVERY THE MACHINE (IF
PRE-SET WITH FIXED LASER) IS
SET WITH THE CORRESPONDING
OPTION DESELECTED.
TO USE THIS MODE, IT IS NECES-
SARY THAT THE RELEVANT FUNC-
TION IS ENABLED
ON THE
MENU "OPTIONS" DESCRIBED IN
PAR. 15.1.
TO USE THIS WEIGHT APPLICA-
TION MODE THE OPERATOR
MUST REMEMBER THE PRECISE
POINT WHERE THE MEASURE-
MENT WAS TAKEN WITH THE
DISTANCE-DIAMETER CALIPER
ARM.
At the end of the spin, on the rim at "6 hours" is dis-
played a laser beam (emitter) indicating the axis on
which to apply the weight. The positioning of the weight
(s) in depth shall be at the discretion of the operator,
depending on where remembers taking the measure.
BE SURE TO APPLY THE (INTER-
NAL OR EXTERNAL) WEIGHT AS
INDICATED BY THE 2 GREEN AR-
ROWS
(
FIG. 59 REF. 2 OR 3
)
ON
THE CORRESPONDING MONITOR
SCREEN.
•
Weights fitting with mobile laser pointer “at 6
o'clock” (standard on some models
)
ON DELIVERY, THE MACHINE IS
CONFIGURED WITH THE CORRE-
SPONDING OPTION DESELECTED.
TO USE THIS MODE, IT IS NECES-
SARY THAT THE RELEVANT FUNC-
TION IS ENABLED
ON THE
MENU "OPTIONS" DESCRIBED IN
PAR. 15.1.
At the end of the spin, on the rim at "6 hours" is
displayed a laser pointer indicating the exact point
where the weight has to be applied.
THE WEIGHT HAS TO BE APPLIED
FROM THE POINT HIGHLIGHTED
BY THE POINTER TOWARDS THE
INSIDE OF THE RIM, AND ITS CEN-
TRE LINE MUST BE RIGHT BY THE
SAME POINTER (SEE FIG. 60).
Fig. 60
RAVAGLIOLI S.p.A.
1297-M005-03
G4.140R - G4.140WS - G4.140WSLB - GP4.140WS
