manualshive.com logo in svg

R&S RTO2000, Начало работы

Поделиться
Скачать
R&S RTO2000 Скачать руководство пользователя страница 98

Operating the Instrument

R&S

®

RTO2000

98

Getting Started 1332.9719.02 ─ 10

Tap the diagram where you want to set the cursors, or draw a rectangle in the dia-
gram to position the cursor lines. The resulting cursor lines measure the selected
waveform. The results appear in the "Cursor Results" box. You can adjust the cur-
sor source, type and position in the result box. Move the cursor lines by dragging
them in the diagram, or by turning the navigation knob. Pressing the knob
switches the parameter to be changed.

Masktest

Starts the on-screen mask definition and the testing against the defined

mask.
Tap the icon and then tap the points that build the mask. Double-tap the last point
to finish mask definition. To create a rectangular mask, draw a rectangle on the
screen. You can move the mask on the screen.
To configure the mask test settings, tap the 

 icon in the "Mask" result box.

Histogram

The histogram icon on the toolbar shows the last selected histo-

gram type. A short tap on the icon activates the selected histogram.
To use another histogram type, select it in the sidebar, and adjust the settings.
Tap the icon and then drag a rectangle on the diagram to mark the histogram
area. The histogram for the selected waveform appears.
Touch and hold the histogram area to open the "Histogram" dialog box.

Measurement

Starts an automatic measurement.

You can run up to 8 automatic measurement groups in parallel. The "Automatic
measurment" icon starts the measurement groups one after the other.
A measurement group consists of minimum one measurement, and can consist of
many measurements of the same category. Tap the icon and select the measure-
ments in the sidebar. Tap the diagram with the waveform to be measured. To
define a measurement gate, draw a rectangle on the screen.
To modify the measurement, tap the 

 icon in the "Measurement" result box.

Quick meas

Performs a set of measurements on the selected waveform. You can con-

figure up to 8 measurement to be included in quick measurement.
Tap the icon and then tap the diagram with the waveform to be measured.

Toolbar

Содержание RTO2000
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды