Trying Out the Instrument
R&S
®
RTO2000
57
Getting Started 1332.9719.02 ─ 10
2. Tap the "Measurement" icon on the toolbar.
3. In the sidebar, select the measurement types, for example, "High", "Low", and
"Amplitude".
4. Tap the diagram in which you want to measure.
The selected measurement types are enabled, using the selected (focused)
waveform as the source. The "Measurements" result box shows the measured
values.
5. To display statistical results for the measurement, double-tap the results.
Alternatively, press the [Meas] key in the [Analysis] area of the front panel.
6. Enable the "Statistics" option.
7. Tap "Advanced Setup".
Performing Basic Measurements