Instrument Tour
R&S
®
RTO2000
34
Getting Started 1332.9719.02 ─ 10
[Levels]
The rotary knob sets the trigger level for all trigger types. Turn clockwise to move
up the trigger level. If the selected trigger type requires two trigger levels - upper
and lower level - press the knob to toggle between the two levels.
[Source]
Opens a dialog box where you can select the trigger source. Press the key again
to switch the source. The key lights up in the color of the selected trigger source.
[Slope]
Toggles the trigger slope or trigger polarity, dependent on the trigger type. The
current setting is shown on the trigger label, which is in the upper part of the side-
bar.
[Mode]
Toggles the trigger mode between Auto and Normal. The current setting is shown
on the trigger label.
[Run Stop]
Starts and stops the continuous acquisition. A green light indicates a running
acquisition. A red light shows that acquisition is stopped.
[Single]
Starts a defined number of acquisitions. A green light indicates a running acquisi-
tion. A red light shows that acquisition is stopped. Press the key again to stop
running acquisitions.
To set the number of acquisitions, press the [Trigger] key, select the "Ctrl/Action"
tab, and set "Average count (N-single count)".
5.3.6
Analysis Keys
The keys in the Analysis functional block provide direct access to measurement
and analyzing functions. If you press [Cursor], [Zoom] or [Meas], the action starts
on first keypress, and a second keypress opens the corresponding dialog box. If
you press another function key, the dialog box opens.
Keys and Controls
