manualshive.com logo in svg

R&S RTO2000, Начало работы

Поделиться
Скачать
R&S RTO2000 Скачать руководство пользователя страница 15

Preparing for Use

R&S

®

RTO2000

15

Getting Started 1332.9719.02 ─ 10

To power on

1. Connect the power cable to the AC power connector on the rear panel of the

R&S

 

RTO.

2. Connect the power cable to the socket outlet.

3. Switch the main power switch at the rear of the instrument to position I.

The power key on the front panel lights up.

Before you start measurements, be sure to comply with the warm-up phase
specified in the data sheet.

If you leave the main power switch on, the instrument is in standby mode. To dis-
connect from power supply, power off the instrument. Powering off is only
required if the instrument must be disconnected from all power supplies.

To power off

1. If the instrument is running and the [Power] key is green, press the [Power]

key on the front panel to shut down the instrument.

2. Switch the main power switch at the rear of the instrument to position 0.

3. Disconnect the AC power cable from the AC power supply.

Risk of losing data

If you switch off the running instrument using the rear panel switch or by
disconnecting the power cord, the instrument loses its current settings. Fur-
thermore, program data can be lost.
Press the POWER key first to shut down the application properly.

Powering off also interrupts the power supply of the OCXO (option OCXO Refer-
ence Frequency, R&S RTO-B4).

4.3.2

 

Starting Up and Shutting Down

The [Power] key is located in the bottom left corner of the front panel.

Starting the Instrument

Содержание RTO2000
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды