Trying Out the Instrument
R&S
®
RTO2000
50
Getting Started 1332.9719.02 ─ 10
7. To return to the original scaling, try the [Undo] key in the [Navigation] area.
Press the [Undo] key repeatedly until the original scaling is displayed. Press
the [Redo] key to retrace the undone steps. Thus, you can toggle between the
two displays using the undo and redo keys until you perform a different action.
Alternatively, you can:
● Touch the screen with two spread fingers and pinch them together in hori-
zontal direction.
● Tap the "Undo" icon on the toolbar.
If you use an active single-ended probe, you can measure the DC component of
the signal directly at the probe tip with the integrated R&S ProbeMeter:
1. On the "Vertical" menu, tap "Probe Setup".
2. Make sure that the correct channel is selected on the left tab.
3. In the "Additional" section, tap "ProbeMeter".
A result box shows the DC voltage measured by the R&S ProbeMeter.
6.5
Zooming into the Display
Using the [Scale] rotary knobs, you can change the scaling of the time base and
signal amplitudes in order to enlarge the waveform. If you need to see more
Zooming into the Display
