Instrument Tour
R&S
®
RTO2000
32
Getting Started 1332.9719.02 ─ 10
[Ch <n>]
Turns on, selects, and configures a channel. If the channel is active, the key lights
up in the corresponding channel color .
The effect of the keypress depends on state of the channel:
●
If channel is off: Pressing the key turns on the channel and selects it.
●
If the channel is on, but not selected: Pressing the key selects the channel
waveform.
●
If the waveform is selected: Pressing the key opens the "Vertical" dialog box
for the appropriate channel.
The vertical rotary knobs are focused on the selected waveform. They are illumi-
nated in the color of the selected waveform.
[Logic]
Opens the dialog box for configuration of parallel buses and digital channels. The
key lights up if you enable at least one parallel bus. You can switch off the
selected bus using the [Signal Off] key.
[Ref]
Opens the "Reference" dialog box, where you can configure and display refer-
ence waveforms. Press the key repeatedly to switch the reference waveform.
If a reference waveform is selected, the vertical rotary knobs are illuminated in
white or light gray (default colors), depending on the selected waveform.
[Math]
Opens the "Math" dialog box, where you can configure the calculation of mathe-
matical waveforms using various mathematic operations on other waveforms.
Press the key repeatedly to switch the math waveform.
If a math waveform is selected, the vertical rotary knobs are illuminated in brown
(default color), the brightness of the color depends on the selected waveform.
[Position] (upper knob)
The upper rotary knob changes the vertical position or the offset of the selected
waveform. The horizontal axis and the selected waveform are moved vertically.
The knob lights up in the color of the selected waveform.
You can select if the knob changes the position or the offset in "File" menu >
"Frontpanel Setup" > "Knobs". To set the value to zero, press the knob. Turn
clockwise to move up the waveform. The current value is shown in the input box
in the lower right corner of the screen.
●
Position indicates the vertical location in divisions.
Keys and Controls
