R&S RTO2000, Начало работы

Страница: 39 / 119

Trying Out the Instrument
R&S
®
RTO2000
39 Getting Started 1332.9719.02 ─ 10
6 Trying Out the Instrument
This chapter introduces the most important functions and settings of the
R&S
RTO step by step. The complete description of the functionality and its
usage is given in the "User Manual". Basic instrument usage is described in
Chapter 7, "Operating the Instrument" , on page 80.
Prerequisites
●
The instrument is set up, connected to the mains system, and started up as
described in
Chapter 4, "Preparing for Use" , on page 11.
●
A probe is available.
For these first measurements, you use the internal calibration signal, so you do
not need any additional signal source or instruments. Try out the following:
● Displaying a Basic Signal ................................................................................39
● Acquiring Data .................................................................................................41
● Organizing the Display .................................................................................... 43
● Changing the Waveform Scaling and Position ................................................ 46
● Zooming into the Display .................................................................................50
● Displaying the Waveform History .................................................................... 53
● Performing Basic Measurements .................................................................... 55
● Performing a Basic FFT Analysis ....................................................................65
● Performing Mathematical Calculations ............................................................68
● Performing a Search ....................................................................................... 69
● Performing a Mask Test .................................................................................. 71
● Printing and Saving Screenshots .................................................................... 74
● Saving Data .....................................................................................................77
6.1 Displaying a Basic Signal
Displaying the input from a signal channel is simple and straightforward. Further-
more, you get to know some basic trigger functions. The R&S
RTO provides
wide-ranging trigger functions to find various signal anomalies, which are descri-
bed in the instrument help and in the "User Manual".
1. Press the [Preset] key on the front panel (in the [Setup] area on the left).
Displaying a Basic Signal