Trying Out the Instrument
R&S
®
RTO2000
48
Getting Started 1332.9719.02 ─ 10
4. To move the waveform back to the center of the screen, eliminate the offset in
the vertical settings: Press the upper rotary knob in the [Vertical] area (Offset/
Position knob).
The waveform is now displayed in the center of the display, with the x-axis
crossing at 0
V. The waveform might be unstable if the trigger level is above
the waveform.
Note:
If this step does not work as described, check the function assignment
of the rotary knob. The second row of the signal label shows the vertical posi-
tion on the left and the offset on the right. The white value is assigned to the
rotary knob, while the gray value is not. To change the assignment, use "File"
menu > "Hardkey Setup".
5. Tap the "Find level" icon on the toolbar.
The instrument adjusts the trigger level, and a stable waveform is displayed.
Changing the Waveform Scaling and Position