![background image](http://html1.mh-extra.com/html/rands/esu-series/esu-series_operating-manual_3138875154.webp)
Operating Manual 1302.6163.12 - 03
4.123
R&S ESU
Instrument Functions
Analyzer Mode
FREE RUN
The
FREE RUN
softkey activates the free-run sweep mode, i.e. start of a sweep is
not triggered. Once a measurement is completed, another is started immediately.
FREE RUN
is the default setting of R&S ESU.
Remote command:
TRIG:SOUR IMM
VIDEO
The
VIDEO
softkey activates triggering through the displayed voltage.
For the video triggering mode, a horizontal trigger line is shown in the diagram. It
may be used to set the trigger threshold between 0% and 100% of the overall dia-
gram height.
Remote command:
TRIG:SOUR VID
TRIG:LEV:VID 50 PCT
EXTERN
The
EXTERN
softkey activates triggering via a TTL signal at the input connector
EXT TRIGGER/GATE
on the rear panel.
The external trigger level can be adjusted in the range from 0.5 V to 3.5 V. The
default value is 1.4 V.
Remote command:
TRIG:SOUR EXT <numeric_value>
SWE:EGAT:SOUR EXT
TRIG:SEQ:LEV:EXT
IF POWER
The
IF POWER
softkey activates triggering of the measurement via signals which
are outside the measurement channel.
For this purpose, the R&S ESU uses a level detector at the second intermediate fre-
quency. The detector threshold can be selected in a range between –30 dBm and -
10 dBm at the input mixer. The resulting trigger level at the RF input is calculated via
the following formula:
For this purpose, the R&S ESU uses a level detector at the second intermediate fre-
quency. The detector threshold can be selected in a range between –50 dBm and -
10 dBm at the input mixer. The resulting trigger level at the RF input is calculated via
the following formula:
The bandwidth at the intermediate frequency is 10 MHz. The R&S ESU is triggered
as soon as the trigger threshold is exceeded within a 5 MHz range around the
selected frequency (= start frequency in the frequency sweep).
Thus, the measurement of spurious emissions, e.g. for pulsed carriers, is possible
even when the carrier lies outside the selected frequency span.
Remote command:
TRIG:SOUR IFP
SWE:EGAT:SOUR IFP
Side menu
MixerLevel
min
RFAtt PreampGain
–
+
InputSignal MixerLevel
max
RFAtt PreampGain
–
+
≤
≤
Содержание ESU Series
