RAM CHASSIS CAB 2024, Руководство пользователя

Страница: 160 / 360

* The suggested selection depends and may change
depending on the customer preferences for braking
performance. Condition of the trailer brakes, driving
and road state may also affect the selection.
Display Messages
The trailer brake control interacts with the instrument
cluster display. Display messages, along with a single
chime, will be displayed when a malfunction is deter-
mined in the trailer connection, trailer brake control, or
on the trailer
page 78.
WARNING!
Connecting a trailer that is not compatible with the
ITBM system may result in reduced or complete loss
of trailer braking. There may be an increase in stop-
ping distance or trailer instability which could result in
personal injury.
CAUTION!
Connecting a trailer that is not compatible with the
ITBM system may result in reduced or complete loss
of trailer braking. There may be an increase in stop-
ping distance or trailer instability which could result in
damage to your vehicle, trailer, or other property.
NOTE:
•
An aftermarket controller may be available for use
with trailers with air or EOH trailer brake systems. To
determine the type of brakes on your trailer and the
availability of controllers, check with your trailer
manufacturer or dealer.
•
Removal of the ITBM will cause errors and it may
cause damage to the electrical system and elec-
tronic modules of the vehicle. See an authorized
dealer if an aftermarket module is to be installed.
Towing Requirements — Trailer Lights
And Wiring
Whenever you pull a trailer, regardless of the trailer
size, stoplights and turn signals on the trailer are
required for motoring safety.
The Trailer Tow Package may include a four- and seven-
pin wiring harness. Use a factory approved trailer har-
ness and connector.
NOTE:
Do not cut or splice wiring into the vehicle’s wiring
harness.
The electrical connections are all complete to the
vehicle but you must mate the harness to a trailer con-
nector. Refer to the following illustrations.
NOTE:
•
Disconnect the trailer wiring connector from the
vehicle (or any other device plugged into vehicle’s
electrical connectors) before launching a boat into
water.
•
Be sure to reconnect once clear from water area.
Four-Pin Connector
1 — Ground
2 — Park
3 — Left Stop/Turn
4 — Right Stop/Turn
158 STARTING AND OPERATING